Inquiry

MEPG500

EPG SERIES
  1. Home
  2. Products
  3. (M)EPG SERIES
MEPG500

The EOS Power MEPG500 Series of Medical AC-DC Power Supplies provides up to 500 W of regulated output power over a wide input range of 90–264 VAC. The power supplies are available in six single output voltages ranging from 12 V to 58 V. The MEPG500 Series can be used in a broad array of space-constrained applications in which minimal power loss and easy thermal management are required.

FEATURES
  • 5 x 3 x 1.6
  • New Efficient GaN power technology design
  • 300 Watts Convection Cooled & 500 Watts Forced Cooled
  • Efficiency up to 94%
  • -40 to 70 °C operating temperature
  • 550 W Peak power (Up to 10 sec)
  • High power density : 20.83 W/inch3
  • IEC / EN / ANSI AAMI 60601-1 compliant
  • Thermal shut-down feature / Dual fusing
  • I2C interface communication provision added in future
  • Fan 12 VDC, 0.5 A output & Remote sense signal
  • Over temperature, OV, OC and SC protection
  • Available with metal enclosures/accessories
AVAILABLE WITH COVER KIT
MEPG500_Coverkit

MEPG500-CK Series


Input Specifications
Input Voltage                 90-264 VAC Universal Input (Derate linearly from 100% at 115 VAC to 80% at 90 VAC)
Input Frequency 47-63 Hz
Input Current 6.3 A max
Inrush Current 115 VAC – 25 A, 230 VAC – 45 A, 264 VAC – 75 A
Power Factor Exceeds 0.95 at Full Load
Output Specifications
Output Voltage From 12V to 58V (Refers model number matrix table)                                                            
Output Power Forced air cooling 400 LFM (115 to 264 VAC) 500W
Convection cooling (115 to 264 VAC) 300W
Output Voltage Adjustment +/-3 %
Hold-up Time 10mS Typical
Line Regulation +/-0.5 %
Load Regulation +/-0.5 %
Transient Response Max excursion 5%; 75%-100% step load change at 0.1 A / µs slew rate, 50% duty cycle, 50 Hz Recovery time
Rise Time 55 ms typical
Set Point Tolerance +/-1 %
Over Current Protection > 110 %, Hiccup mode / Auto Recovery
Over Voltage Protection 110 to 140 %, Hiccup mode / Auto Recovery
Short Circuit Protection Hiccup mode / Auto Recovery
Cooling Forced air cooling (400 LFM)
Convection cooling (natural air flow)
General Specifications
Efficiency 94%(48V, 58V), 92%(30V,24V), 90%(12V,15V)                                               
Isolation Voltage Input to Output (2x MOPP) – 4000 VAC
Input to Ground (1x MOPP) - 1500 VAC
Output to Ground (1x MOPP) - 1500 VAC
MTBF 800K Hours, Telcordia -SR332-issue 3
Leakage Current 300 uA Typical
Dimensions 5 x 3 x 1.6 inches (127 x 76.2 x 40.64 mm)
Weight 450 gm approx
Environmental Specifications
Operating Temperature - 40 to +70°C, (-40 to 0°C startup is guaranteed with spec deviation)2                                           
Storage Temperature -40 to +85°C
Relative Humidity 5 % to 95 %, noncondensing
Altitude Operating, RH, non-condensing: 16,000 ft.; Non operating, non-condensing: 40,000 ft
Switching Frequency PFC – 70 to 130 KHz ,PWM – 100-200 KHz
Model Number Description Voltage Max. Load
(Convection)		 Max. Load (Convection)
(400 LFM) 		Min. Load Ripple1
MEPG500-10122Screw Terminal12 V20.0 A33.33 A0.00 A2 %
MEPG500-12122Ring Lug Terminal12 V20.0 A33.33 A0.00 A2 %
MEPG500-13122Molex Connector12 V20.0 A24.00 A0.00 A2 %
MEPG500-10152Screw Terminal15 V16.00 A26.67 A0.00 A2 %
MEPG500-12152Ring Lug Terminal15 V16.00 A26.67 A0.00 A2 %
MEPG500-13152Molex Connector15 V16.00 A24.00 A0.00 A2 %
MEPG500-1024Screw Terminal24 V12.50 A20.83 A0.00 A1 %
MEPG500-1224Ring Lug Terminal24 V12.50 A20.83 A0.00 A1 %
MEPG500-1324Molex Connector24 V12.50 A20.83 A0.00 A1 %
MEPG500-1030Screw Terminal30 V10.00 A16.67 A0.00 A1 %
MEPG500-1230Ring Lug Terminal30 V10.00 A16.67 A0.00 A1 %
MEPG500-1330Molex Connector30 V10.00 A16.67 A0.00 A1 %
MEPG500-1048Screw Terminal48 V6.25 A10.41 A0.00 A1 %
MEPG500-1248Ring Lug Terminal48 V6.25 A10.41 A0.00 A1 %
MEPG500-1348Molex Connector48 V6.25 A10.41 A0.00 A1 %
MEPG500-1058Screw Terminal58 V5.17 A08.62 A0.00 A1 %
MEPG500-1258Ring Lug Terminal58 V5.17 A08.62 A0.00 A1 %
MEPG500-1358Molex Connector58 V5.17 A08.62 A0.00 A1 %
MEPG500-CK Metal Cover Kit Accessory Available.
Model Number Description Voltage Max. Load
(Convection)		 Max. Load (Convection)
(400 LFM) 		Min. Load Ripple1
MEPG500-2412-G4Dual Row Header12 V20.0 A33.33 A0.00 A2 %
MEPG500-2415-G4Dual Row Header15 V16.0 A26.67 A0.00 A2 %
MEPG500-2424-G4Dual Row Header24 V12.5 A20.83 A0.00 A1 %
MEPG500-2430-G4Dual Row Header30 V10.00 A16.67 A0.00 A1 %
MEPG500-2448-G4Dual Row Header48 V06.25 A10.41 A0.00 A1 %
MEPG500-2458-G4Dual Row Header58 V16.17 A8.62 A0.00 A1 %
General Notes:
  • When used in Cover Kit, derate output power to 70% under all operating conditions
  • Output ripple can be more than 2 % of the output voltage at low load condition
  • All specifications are measured at nominal input voltage, 25°C, unless otherwise specified
Notes:
  1. Ripple is peak to peak with 20 MHz bandwidth and 10 μF (Electrolytic capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges
  2. Refer Derating Curves
  3. Output ripple can be more than 10 % of the output voltage
  4. MEPG500-24XX-G series is with specific connector & Mounting Hole Provision, refer mechanical specification. (Contact Sales for more details)
Signals & Controls
Power Good : Is a TTL signal which goes high after main output reaches 90% of its set value.
The delay is 0.1 s to 0.5 s
Power Fail : The same signal goes low at least 1ms before main output falls to 90% of set value at AC Power off








Power Good /Power Fail Signal		 MULP180
Remote on/off Shorting Pin 3 to Pin 4 enables main output while keeping the Pins open disables main output.
SB output voltage 5 VDC / 0.3 A @ 40°C, Derate linearly to 0.25 A @ 70°C
Remote On/Off Signal








Remote On/Off Signal		 MEPG500 Series
Voltage Sense Signal Drawing




Voltage Sense		 EPG500 Series voltage sense
Derating Curve
EPG500 o/p derating and i/p derating
De-rate linearly from 100% at 115 VAC to 80% at 90 VAC



EPG500 derating curve 24 to 58v Convection load: 300 W up to 40°C; derate above 40°C @ 1.67% per °C
Forced air load for Airflow Option A: 500 W up to 40°C derate above 40°C @ 1.67 % per °C
Forced air load for Airflow Option B: 450 W up to 40°C derate above 40°C @ 1.67 % per °C
Power Derating of 24 V, 30 V, 48 V & 58 V models (Open frame / L channel / U bracket options)



EPG500 derating curve of 12 to 15v Convection load: 240 W up to 40°C; derate above 40 °C @ 1.67% per °C
Forced air load for Airflow Option A: 400 W up to 40 °C derate above 40 °C @ 1.67 % per °C
Forced air load for Airflow Option B: 350 W up to 40 °C derate above 40 °C @ 1.67 % per °C
Power Derating of 12 V to 58 V models (Cove kit option)



EPG500 derating for 12-15 CK Convection load for 24 V to 58 V: 210 W up to 40°C; derate above 40 °C @ 1.67% per °C
Convection load for 12 V,15 V: 168 W up to 40°C; derate above 40 °C @ 1.67 % per °C
Power Derating of 12 V & 15 V models (Cover kit option)



EMC
Parameter Conditions/Description Criteria
Conducted Emissions EN 55011, CISPR22-B, FCC PART15-B Pass
Radiated Emissions EN 55011 Pass
Level B with external core (King core K5B RC 25x12x15-M or equivalent in input cable)
Input Current Harmonics EN 61000-3-2 Class A
Voltage Fluctuation and Flicker EN 61000-3-3
ESD Immunity EN 61000-4-2 Level 3, Criterion A
Radiated Field Immunity EN 61000-4-3 Level 3, Criterion A
Electrical Fast Transient Immunity EN 61000-4-4 Level 3, Criterion A
Surge Immunity EN 61000-4-5 Level 3, Criterion A
Conducted Immunity EN 61000-4-6 Level 3, Criterion A
Magnetic Field Immunity EN 61000-4-8 Level 3, Criterion A
Voltage dips, interruptions EN 61000-4-11 Criterion A & B
Safety
CE Mark Complies with LVD Directive
Safety Standard(s) IEC 60601-1
EN 60601-1
ANSI/AAMI ES 60601-1 & CSA C22.2, No.60601-1
Approval Agency Nemko, UL, C-UL
Safety File Number(s) Class-I : UL : Certificate No: Pending, Nemko: Certificate No.: Pending, CB Ref. Certificate No.: Pending
Downloads
CB Class - I Certificate
Nemko Class - I Certificate
UL Class - I Certificate
Mechanical Specifications
AC Input Connector (J1) Molex: 26-60-4030
Mating: 09-50-3031; Pins: 08-50-0106		 Pin 1
Pin 2
Pin 3 		AC LINE
NOT FITTED
AC NEUTRAL
DC Ouput Connector (J2)
(Screw Terminal) 		6-32 inches Screw Pan HD Vertical
Mating: Designed to accept Ring Tongue Terminal AMP: 8-31886-1 		Pin 1,2,3,4
PIN 5,6,7,8 		V1 +VE
V1 -VE
DC Ouput Connector (J2)
(Molex Connector) 		Molex MPN: Header Molex p/n: 26-60-4080 or equivalent
Mating part no: A: Housing Molex p/n: 09-50-3081 or equivalent
B: Pins Molex p/n: 08-50-0106 or equivalent 		Pin 1,2,3,4
PIN 5,6,7,8 		V1 +VE
V1 -VE
DC Ouput Connector (J2)
(Ring Lug terminal) 		The DC output terminals are designed to accept a ring-lug terminal. These terminal use 6-32 screw
Ring terminal: Tyco 35148 or KST RV3-4 or equivalent		 Pin 1,2,3,4
PIN 5,6,7,8 		V1 +VE
V1 -VE
Aux Output (Fan)
(J6)		 AMP: 640456-2
Mating: 640440-2		 Pin 1
Pin 2 		FAN +
FAN -
Aux Output (Signal)
(J9)		 Header 2 POS 2.54MM p/n: P9102-40-12-1
Mating part no: CONN RCPT HSNG 2POS CST-100 II p/n: 1375820 - 2
Pins: CONN SOCKET 22-26AWG CRIMP TIN p/n: 1375819-1 		Pin 1
Pin 2 		+VS
-VS
Multifunction Connector
(J10)		 Header 5CKT 2.5MM R/A HDR p/n 22-05-7055 Mating part no : 2.5-mm Pitch Mini-SPOX (TM)
Housing 5264 (5264-05)
Pins: CONN SOCKET 22-28AWG CRIMP TIN p/n 08701039 		Pin 1
Pin 2,3
Pin 4
Pin 5 		5 VDC
GND
ON / OFF
PGPF
Earth (J4) Molex: 19705-4301
Mating: 19003-0001
Mechanical Specifications - MEPG500-G
AC Input Connector (J1) Molex: 41671-3473
Mating: 09-50-8031; Pins: 08-50-0106		 Pin 1
Pin 2
Pin 3 		AC LINE
NOT FITTED
AC NEUTRAL
DC Ouput Connector (J2)
(Header Dual Row) 		Molex Header ULTRAFIT 3.5MM 8CKT p/n 172298-1208 Mating part no: conn RCPT HSG 8POS 3.50MM p/n 172258-3108
Pins : Ultra-Fit Tangless Crimp Terminal, Female, 0.76µm Gold (Au) Plating, 16-18 AWG p/n 1722536012 		Pin 1,2,3,4
PIN 5,6,7,8 		V1 +VE
V1 -VE
Aux Output (Fan)
(J6)		 AMP: 640456-2
Mating: 640440-2		 Pin 1
Pin 2 		FAN +
FAN -
Multifunction Connector (J10)
Header Dual Row		 CONN HEADER VERT 10POS 2MM P/N FCI:98414-G04-10ULF
Mating part no: Headers & Wire Housings Crimp-to-Wire Hsg Pol,Latch,Dbl Rw,10P p/n FCI:90311-010LF
Pins:77138-001RELF Headers & Wire Housings TERM MTK FST CTW 		Pin A1,A2
Pin A3,B1
Pin A4
Pin A5
Pin B2,B3
Pin B4
Pin B5 		5 VDC
NC
+VS
-VS
GND
PG
ON / OFF
Earth (J4) Molex: 19705-4301
Mating: 19003-0001
MEPG500-1XXX WITHOUT MULTI CARD
MEPG500-1XXX WITHOUT MULTI CARD
MEPG500-2XXX WITH MULTI CARD
MEPG500-2XXX WITH MULTI CARD
MEPG500-1XXX L
MEPG500-1XXX L
MEPG500-1XXX U
MEPG500-0XXX-L
Mechnical Drawing

MEPG500-1XXX-COVER KIT

MEPG500-1XXX-COVER KIT
Mechnical Drawing

MEPG500-1XXX-COVER KIT WITH FAN

MEPG500-1XXX-COVER KIT WITH FAN
Mechnical Drawing

MEPG500-2XXX L

MEPG500-2XXX L
Mechnical Drawing

MEPG500-2XXX U

MEPG500-2XXX U
Mechnical Drawing

MEPG500-24XX G

MEPG500-24XX G
Approvals
Certificate Standard Downloads
CB Class - I Certificate IEC 60601-1
Nemko Class - I Certificate EN 60601-1
UL Class - I Certificate UL ANSI / AAMI ES 60601-1 & CSA C22.2, No.60601-1
Nomenclature:
MEPG500

Related Products